Westermo GS-01 User Manual download pdf (Page 27)

276195-2201

+CRC – Cellular result codes

This command enables a more detailed ring indication, in case of incoming call (voice or

data). Instead of the string ”RING”, an extended string is used to indicate which type of

call is ringing (e.g. +CRING: VOICE).

These extended indications are:

+CRING: ASYNC for asynchronous transparent

+CRING: REL ASYNC for asynchronous non-transparent

+CRING: VOICE for normal speech.

+CRING: FAX for fax calls

Application to GSM AT+CRC=0 Extended reports disabled

GSM to application OK Command valid

Application to GSM AT+CRC=1 Extended reports enabled

GSM to application OK Command valid

+DOPT – Other radio link parameters

This Wavecom specific command allows to change some supplementary radio link

protocol parameters.

Command syntax: AT+DOPT=<reset_allowed>,<dtx_allowed>

<reset_allowed> Description

0 Data communication is hung up in case of bad radio link.

1 (default) Data communication goes on in case of bad radio link

(possible loose of data)

The second parameter is reserved for future use.

Application to GSM AT+DOPT=? Test command

GSM to application (0,1),(0,1)

Application to GSM AT+DOPT=1 Set new parameters

GSM to application OK Command valid

Application to GSM AT+DOPT? Current values

GSM to application 1,1 Command valid

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

No comments

Westermo GS-01 User Manual Page 27