Westermo FD-40 User Manual download pdf (Page 15)

156630-2242

6.4.3 Off-line configuration by FD-Tool

This part will only describe the usage of FD-Tool to perform an off-line configuration.

For FD-Tool installation and general FD-Tool handling, see “FD-Tool installation manual.”

Initiate a new off-line configuration

• Start the FD-Tool.

• Select the device type by selecting File > Configuration > New (default / device)

and Select Group in Device Selection window. The selected group has to be the same

as the FD-40 device,for which the configuration will be used.

• FD-Tool will show the device type of this FD-40 for which all configuration parameters

have to be set.

Modify configuration

Configurations are defined per device type, see “Functional description”, chapter 7.

FD-40 B Buffered

Load configuration to FD-40

• See “On-line configuration by FD-Tool”, chapter 6.4.2.

6.4.4 Save, load and modify configuration files by FD-Tool

Save configuration to disk

• The present configuration can be saved to disk as a file, to be used for future configu-

rations of the same device type,by selecting File > Configuration > Save to disk

• An arbitrary file name can be used, saved as a *.cnf file.

Load and modify a disk stored configuration

• Load configuration from disk by selecting Configuration > Load from disk

and open the wanted configuration file (*.cnf).

• FD-Tool shows the device type of this FD-40 with the present configuration.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Westermo FD-40 User Manual Page 15