Westermo RFI-2xx User Manual

Industrial Routing Switchwww.westermo.com©Westermo Teleindustri ABUser Guide6641-22310RedFox Industrial SERIESWeOS

106641-22310DescriptionThe RedFox Industrial includes a collection of high performance industrial Ethernet switches with enhanced routing functionalit

116641-22310HousingDescriptionDepending on RedFox model, the size of the enclosure may vary. There are two sizes available, a two-slot housing and a t

126641-22310Power and CPU moduleDescriptionRegardless of RedFox model, all units will be delivered with the power and CPU interface in the slot on the

136641-22310Interface specificationsPower and CPURated voltage 20 to 48 VDCOperating voltage 16 to 60 VDCRated frequency DCPolarity Reverse polarity p

146641-22310Connection to console portThe console port can be used to connect to the CLI (Command Line Interface). The console connector is a micro U

156641-22310Ethernet TX Electrical specification IEEE std 802.3. 2005 EditionData rate 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s, manual or autoDuplex Full o

166641-22310Position Direction Description1 In/Out BI_DA+2 In/Out BI_DA–3 In/Out BI_DB+4 In/Out BI_DC+5 In/Out BI_DC–6 In/Out BI_DB–7 In/Out BI_DD+8 I

176641-22310Power connectionI/O connection12344-position Product marking Direction DescriptionNo. 1 +DC1 Input Supply voltage input DC1No. 2 +DC2 Inpu

186641-22310LED indicators Power/CPULED Status DescriptionON OFF Unit has no power.GREEN All OK, no alarm condition.RED Alarm condition, or until unit

196641-22310Interface modules8 copper portsAll ports support category 5e cable or better and can handle cable lengths up to 150 m (492 ft).Interface s

26641-22310Legal informationThe contents of this document are provided “as is”. Except as required by applicable law, no warranties of any kind, eithe

206641-22310+DC1+DC2COMCOMRSTPFRNTVPNONDC1DC2121110/100/100010/100/100010/100 Base-TXPOWERCONSOLEIO234567823415678234Position Direction* Description1

216641-22310F4G, 4 SFP slotsThe F4G interface has four SFP slots supporting Ethernet 10/100/1000BaseFX/X. Each slot can hold one SFP transceiver for

226641-22310Position Direction* DescriptionRx In Receive portTx Out Transmit port* Direction relative this unit.+DC1+DC2COMCOMRSTPFRNTVPNONDC1DC21211

236641-22310Position Direction* DescriptionRx In Receive portTx Out Transmit port* Direction relative this unit.10015263748LED indicators F8LED Statu

246641-22310F4G-T4G, 4 SFP slots and 4 Gbit copper portsThe F4G-T4G interface has four SFP slots supporting Ethernet BaseFX/X and four RJ-45 connector

256641-22310Position Direction* Description1 In/Out BI_DA+2 In/Out BI_DA–3 In/Out BI_DB+4 In/Out BI_DC+5 In/Out BI_DC–6 In/Out BI_DB–7 In/Out BI_DD+8

266641-22310SFP TransceiversSee SFP Transceivers User Guide 6100-0000 for supported SFP transceivers. Note: The unit supports Westermo labelled transc

276641-22310RemovalPress down the support at the back of the unit using a screwdriver. See figure.MountingMounting, 35 mm DIN-rail The unit can be mou

286641-22310Getting StartedThis product runs Westermo Operating System (WeOS) which provides several management tools that can be used for configurat

296641-22310Cable factory reset on RedFox IndustrialIt is possible to set the unit to factory default settings by using a standard (straight) Ethernet

36641-22310SafetyBefore installation:Read this manual completely and gather all information on the unit. Make sure that you understand it fully. Che

306641-22310

316641-22310

REV. E 6641-22310 2015-06 Westermo Teleindustri AB, Sweden – A Beijer Electronics Group CompanyFor complete contact information, please visit our

46641-22310Note. Fibre Optic HandlingFibre optic equipment needs special treatment. It is very sensitive to dust and dirt. If the fibre will be disco

56641-22310FCC Part 15.105 Notice:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15

66641-22310M5 threaded hole for PE connectionSafety control drawingPositionDirection / descriptionInput / Output values12341 IO / Status + Uin = 60 V

76641-22310Safety control drawingPosition Direction* / description Input/output valuesRx In / Receive portMax 5 dBmTx Out / Transmit portPosition Dire

86641-22310Declaration of Conformity Westermo Teleindustri AB Declaration of conformity Org.nr/ Postadress/Postal address Tel. Telefax Pos

96641-22310Type tests and environmental conditionsPhenomena Test Description Test levelsESD EN 61000-4-2 Enclosure contact ± 6 kVEnclosure air ± 8 kV