Industrial Ethernet 8-port Switchwww.westermo.comREV.A 6640-3202 2008.05 Mälartryck AB, Eskilstuna, Sweden©Westermo Teleindustri ABReference Guid
106640-3202Enable IGMP Querier Auto mode enabled + Querier disabled: This unit will always act as a member in the network. Auto mode disabled + Querie
116640-3202SNMP (Simple Network Management Protocol)The Lynx has support for SNMP v2c with a range of MIBs, which are listed and explained in the Lynx
126640-3202Port ConfigurationAll ports can be configured individually in the Port Configuration. To confirm changes made to the Port Configuration cli
136640-3202Parameter Options DescriptionPort Number N/A Port number correspond to the port number on the actual switchLink Status LINK Indicates Link
146640-3202VLANThe Lynx has support for VLAN, and each trunk port can be individually granted different levels of access. In the VLAN Configuration ea
156640-3202Parameter Options DescriptionName White White is set as management VLAN. VLAN ID 1Red Blue Green Yellow Brown PinkRed-Pink VLAN are 6 pred
166640-3202MAC Filter If the MAC filter is enabled, only approved MAC addresses will be granted access through the switch. To approve MAC addresses, a
176640-3202Input-box small Input-box if a MAC address is added according to method 1) or 2)Input-box large Input-box if a MAC address is added accordi
186640-3202AdministrationPasswordThe Lynx switch administrator password can be changed via the Web Interface. These settings can be made in the User
196640-3202Backup & RestoreThe configuration of the Lynx switch can be saved as a file to a PC. The file can then be used to restore the configura
26640-3202Accessing and Using the Web InterfaceTo access to all possible settings, the Lynx switch should be configured via the onboard web based conf
206640-3202Firmware UpgradeLynx switches with firmware 3.12 and latter can be updated via the Web Interface. To accomplish a firmware update a TFTP or
216640-3202StatisticPort statisticsA overview of the Lynx port statisticsAvailable options are:Details Get a more detailed specification on a specific
226640-3202Parameter Options DescriptionPort Number N/A Port number correspond to the port number on the actual switchLink Status LINK (White)LINK (Gr
236640-3202Port Statistics – DetailsA detailed overview of a specific port.Available options are:Previous port Display detailed specifics of previous
246640-3202Parameter DescriptionLink Status Indicates link statusInbound traffic Description Outbound traffic DescriptionTotal bytes In Total Bytes re
256640-3202Errors Description Errors DescriptionCollisions The number of collision events seen by the MAC not includ-ing those counted in Single, Mult
Traffic Size AnalysisDescription Traffic Size AnalysisDescription64 Octets Total frames received (and/or transmit-ted) with a length of exactly 64 oct
REV.A 6640-3202 2008.05 Mälartryck AB, Eskilstuna, SwedenWestermo Teleindustri AB • SE-640 40 Stora Sundby, SwedenPhone +46 16 42 80 00 Fax +46
36640-3202Accessing the Lynx Web InterfaceThe Lynx can easily be configured via the onboard Web based configuration interface or by using the Westermo
46640-3202Lynx Web Interface StructureThe administrator start page will be displayed and show a brief summary of the unit. It will be similar to figur
56640-3202ConfigurationNetwork (IP)The Lynx switch IP-address can individually be changed via the Web Interface, another option is DHCP. These setti
66640-3202IdentityThe Lynx switch identity can be changed via the Web Interface. These settings can be configured in the Identity Settings. Availabl
76640-3202Redundancy protocol – FRNTThe Lynx switch supports the redundancy protocol FRNT (Fast Re-configuration of Network Topology, FRNT version 0).
86640-3202Redundancy protocol – RSTPThe Lynx switch support the Rapid Spanning Tree Protocol (RSTP) according to IEEE802.1w with fallback to the Spann
96640-3202IGMP (Internet Group Management Protocol)The Lynx switch supports IGMP (Internet Group Management Protocol) Snooping based on IGMP v1, IGMP
Comments to this Manuals