Westermo MCI-211G User Manual download pdf (Page 2)

The MCI-211G Industrial Gigabit Ethernet Converter, conforming IEEE 802.3 10Base-T, 802.3u

100Base-TX and 1000Base-T/SX/LX standard, supports RJ-45 copper to Gigabit fiber conversion using

store and forward technology. The MCI-211G adopts rugged metal case design to operate in harsh

environments (-25~70

C); It also provides IP-31 standard protection. It features Link Fault Forwarding

to raise an alarm when a remote fault occurs and also adopts one relay output to alarm users if a port

link fails or if the power fails. Alarms can be enabled/ disabled by dip switch. The fiber port supports

SFP socket for several of SFP transceiver to achieve different link distance.

MCI-211G is recommended to be powered by DC 24V with 12~48V range from the 6-pin removable

terminal block.

Introduction

Box contents



MCI-211G



Quick Installation Guide

Mounting the Unit



Din-Rail mount: Mount the din-rail clip screwed

on the rear of MCI-211G on the DIN rail.

Wiring the Power Inputs

1. Insert the positive and negative wires into the

V+ and V- contact on the terminal block connector.

2. Tighten the wire-clamp screws to prevent the

DC wires from being loosened. See Figure-1

Notes: The recommended working voltage

is DC24V (DC12~ 48V)

Package contents Check List

Figure-1

MCI-211G

DC1 DC2Alarm



LZhiZgbdIZaZ^cYjhig^67

lll#lZhiZgbd#Xdb

>cYjhig^Va<^\VW^i:i]ZgcZi

H;EBZY^V8dckZgiZg

MCI-211G

Fj^X`>chiVaaVi^dc<j^YZ

1 2 3 4 5 6 7 ... 15 16

No comments

Westermo MCI-211G User Manual Page 2